DIY Mosaic Pots with Ceramic Tiles - Applying the Tile Grout

(This is the continuation of Part 2)

This may, arguably, be the fun part of the DIY Mosaic Garden Pot project, if not the dirtiest part. In this stage, you'll be working on filling in the spaces in between tiles of the mosaic and further securing them to the pot. Other than black, there are other available tile grout colors like gray and white. In a way, tile grouting gives a touch of color syle to the finished mosaic pot.

Applying the Tile Grout

1. Before you add the tile grout, it is best to feel if there is tile adhesive that sticks out with the tiles. This is tile adhesive that may have been pushed out from beneath the tile pieces and dried. If so, use an old screwdriver to scrape off this excess tile adhesive.
   
   Ideally, there should be some space between the tiles for the grout to fill. Edges and points of broken tiles can be extremely sharp so wear garden gloves to protect your hands from injury.
   
   
   

DIY Mosaic Pots with Ceramic Tiles - Applying the Tiles

(This is the continuation of Part 1)

After the initial preparations on the pot and tiles, is the part where you will be filling in the design with the tiles. You will need tile adhesive for attaching the tiles to the garden pot.

In some other countries, this is sometimes called thinset tile mortar. Tile adhesive is cheap and is often bought by the bag. It and can be economical when making a number of mosaic garden pots at a time.

Applying the Tiles

1. Put tile adhesive in a disposable plastic bowl with water. Be sure to follow the mixing ratio as instructed in the package label of the tile adhesive. Wear a protective face mask to avoid breathing the tile adhesive powder.
   
   
   

DIY Mosaic Pots with Ceramic Tiles

I've had initial success with mosaic pots and decided to make another one using some new techniques. I've stored away leftover tile grout and tile grout sealer and was unsure if they were still good enough. I did pack them really well and placed them in a dry and dark storage.

So now, which is a few years later, I decided to make another mosaic garden pot but with a different design. I was pleasantly surprised to find that the tile grout and sealer were still good!

How to Air-Layer Trees and Vines with Just Water

In a previous article, I mentioned how one could easily propagate the Bougainvillea with just water. There was one query asking if other garden plants would respond positively with this approach of propagation. In particular, the inquirer asked about the Gumamela, which is the local term for Hibiscus.

It was rather coincidental that I air-layered a Hibiscus plant with this water technique and sent her photos of the Hibiscus plant I successfully propagated. She was elated to know as she wanted to grow her Hibiscus collections.

It seems that common garden woody plants like the bougainvilleas and hibiscus respond well to air-layering with water. But how about the plants that potentially grow bigger, like vines and trees?

So I put that to the test with a very mature vine of ours which is the Sandpaper Vine or Petrea volubilis, shown below.

Air-Layering Technique with Plain Water - Part 2

(This is the continuation from Part 1)

With the bottle now covered and secured, water and fertilize the plant as usual. Occasionally check the inside for water. Fill it up if the water level falls below 1 inch. Water loss may occur due to evaporation or spill-out when the plant branch is disturbed.

Wait until the roots will form.

Procedure Once the Roots Emerge

18. After 30 days, remove the foil cover of the bottle to peer on the inside of the plastic bottle. If the water in the bottle isn't to cloudy, you could actually notice some of the roots.
    
    
    
    
    

Air-Layering Technique with Plain Water

It was almost incredible to learn that some gardeners have professed to being able to propagate plants with just plain water. By this, I don't refer to dipping cuttings into a jar of water and then wait for some nubs to form which, hopefully, grow into roots.

That kind of propagation works, but seemingly to just a few kinds of plants - and sometimes, the mortality of seedlings is high.

Sandpaper Vine Propagation by Cuttings in Water

In a previous article, I wrote how the Sandpaper Vine (Petrea volubilis), also known as Queen's Wreath, Purple Wreath, Blue Bird Vine and Fleur de Dieu, can be propagated by using a simple method. That Sandpaper Vine propagation is by a humidity chamber.

Recently, I discovered another way to propagate the Sandpaper Vine almost by accident.