With our rainwater barrel now fully supported with the fabricated rain barrel platform, we will now be able to have a faucet or a spigot installed. The raised platform for the rainwater barrel is 14 inches high, is all-metal and heavily welded. It's adequate to carry the load of a fully filled rain water barrel.
Fortunately, the workers who worked on the platform, as well as the garden pergola and garden gate arch, even volunteered to finish the job of installing the rain barrel faucet. They had boring tools like a power drill and sealant, they said. I knew I could make it DIY, but who couldn't refuse free labor? All they asked me was to buy a faucet kit that had locking nuts for mounting in a container.
Showing posts with label water. Show all posts
Showing posts with label water. Show all posts
Raised Platform for a Rain Water Barrel
With several metal scraps that remained from the construction of our garden gate arch and the garden pergola, I had to think of what else there is to do with the scrap. There were tubular pipes and round steel bars. Sell the whole lot to scrap buyers? Or just store it away somewhere? It's metal and will hardly deteriorate anyway.
The foreman and the workers did a fine job on the two projects that I wanted something usable that can be fabricated from the scrap metal. They were still working at my neighbor's house and so I had time to think. They had tools to work on the metal scrap like the high-speed cutter and welding machine, plus there was still some excess cement and sand remaining. It would be a waste not to seize the opportunity.
The foreman and the workers did a fine job on the two projects that I wanted something usable that can be fabricated from the scrap metal. They were still working at my neighbor's house and so I had time to think. They had tools to work on the metal scrap like the high-speed cutter and welding machine, plus there was still some excess cement and sand remaining. It would be a waste not to seize the opportunity.
Improvised Soaking Tubs to Water Seedlings
Soaking seedlings in a tray using tubs is a practical method for watering and fertilizing young plants. This would be nice if you had the garden tray and a matching soaking tub to utilize. But what if you didn't have or find an appropriate soaking tub to match your garden tray? Or what if you only had a couple of tubs, bins or pans?
In these situations, you can improvise a setup where you can still use the bins or trays that you have at hand. But you do need a couple pieces of whatever you have. This article discusses how you can set this up with nothing more than a big disposable plastic garbage bag.
In these situations, you can improvise a setup where you can still use the bins or trays that you have at hand. But you do need a couple pieces of whatever you have. This article discusses how you can set this up with nothing more than a big disposable plastic garbage bag.
Labels:
diy project,
propagation,
seedlings,
water
Soaking Seedlings in Tray Using a Tub
For convenience, we re-pot seedlings propagated from cuttings into seedling bags. This frees up the seedling trays for other cutting propagation and the new seedling bags allows the roots to grow in a bigger and coarser medium. These many bagged seedlings are located in different parts of the garden, some in our nursery racks, some on the ground and elsewhere. In this situation, watering the seedlings using a garden sprayer may not be the best method.
One practical option is had was to place the seedlings in garden mesh trays and then position these in my homemade garden nursery racks. I then soak these mesh trays in soaking tubs to water the seedlings. Here's a garden mesh tray with the seedlings inside. The garden mesh tray is put in a soaking tub to water the seedlings.
One practical option is had was to place the seedlings in garden mesh trays and then position these in my homemade garden nursery racks. I then soak these mesh trays in soaking tubs to water the seedlings. Here's a garden mesh tray with the seedlings inside. The garden mesh tray is put in a soaking tub to water the seedlings.
Labels:
propagation,
seedlings,
tip,
water
Homemade Garden Pot Cover for Rains
In a previous article, I discussed a simple homemade solution to prevent rains from overwatering your potted outdoor garden plants. Not all plants are created equal, and some, like the Mandevillas cannot tolerate continuous daily rains. The homemade solution in the article made use of an old dining table placemat for an effective garden pot cover.
If you don't have an old placemat or something similar, there's another way of making a garden pot cover.
Here's how you can make use of disposable plastic trays that are found in supermarkets and bakeshops. The procedure is essentially the same as discussed before but with a few modifications.
If you don't have an old placemat or something similar, there's another way of making a garden pot cover.
Here's how you can make use of disposable plastic trays that are found in supermarkets and bakeshops. The procedure is essentially the same as discussed before but with a few modifications.
Labels:
diy project,
garden pots,
tip,
water
Prevent Overwatering - Garden Pot Cover
Many flowering plants benefit from plenty of sunshine like the Red Mandevillas shown on the left. So it's sensible to locate them outside even if they're planted in garden pots. Having them outside though poses some problems when the rainy season comes.
Mandevillas simply hate being overwatered. Mandevillas have tuberous roots that already store water, and therefore watering needs to be done sparingly. I learned this the hard way way when one of my Pink Mandevillas died after receiving daily rains for five days.
Mandevillas simply hate being overwatered. Mandevillas have tuberous roots that already store water, and therefore watering needs to be done sparingly. I learned this the hard way way when one of my Pink Mandevillas died after receiving daily rains for five days.
Labels:
diy project,
garden pots,
Mandevilla,
tip,
water
Collecting Rainwater with a Rain Barrel
After building a system of homemade mini-gutters to collect rainwater, the next project would be to find a suitable receptacle.
The most popular container would be some sort of a rain barrel. Plastic drums are the most widely available. Unlike metal drums, they won't rust and are reasonably durable.
Pricewise, some are more affordable than the others. The cheaper ones generally have thinner walls, but the thick walled ones, although a bit pricier, will last a very long time. Some plastic drums have screw-on covers, others have lids and others just have a small opening for a hose.
The most popular container would be some sort of a rain barrel. Plastic drums are the most widely available. Unlike metal drums, they won't rust and are reasonably durable.
Pricewise, some are more affordable than the others. The cheaper ones generally have thinner walls, but the thick walled ones, although a bit pricier, will last a very long time. Some plastic drums have screw-on covers, others have lids and others just have a small opening for a hose.
Labels:
diy project,
water
DIY Mini-Gutters to Collect Rain Water
Rain water is often touted to be very good for watering garden plants. In fact, many gardeners prefer to collect rain water with rain barrels and other rain harvesting systems.
For several months, this writer contemplated on how to collect rain water that drips and flows down the sides of a concrete structure during thunderstorms in the rainy season. When it rains, pools of water appear everywhere at the ground perimeter of the structure. It causes a couple of problems.
For several months, this writer contemplated on how to collect rain water that drips and flows down the sides of a concrete structure during thunderstorms in the rainy season. When it rains, pools of water appear everywhere at the ground perimeter of the structure. It causes a couple of problems.
Labels:
diy project,
water
Drip Irrigation Using Soda Pop Plastic Bottle
A common tendency when watering your garden plants is wasting water through runoffs. This is especially so in a couple of conditions: the ground has a slope or furrows that immediately channel water to other areas and; the stream of water is too strong that it splashes and flows away before being absorbed by the soil. These conditions prevent water from getting to where it is most needed - the garden plant's roots.
Here's a simple and inexpensive solution to getting water to your plant's roots via slow drip irrigation. You only need a 2 liter soda pop plastic bottle, a shoe tack, a small nail and a hammer as shown below:
Here's a simple and inexpensive solution to getting water to your plant's roots via slow drip irrigation. You only need a 2 liter soda pop plastic bottle, a shoe tack, a small nail and a hammer as shown below:
Labels:
diy project,
tip,
water




